Features - Options

North Westerner 2510 Boats

A fuel efficient yacht for the 21st Century using all welded aluminum construction with proven design

Options

(Prices to be determined)

Replace 60hp with 90 hp Honda BF90 Outboard Motor with PGM-FI

Alaskan Bulkhead with (2) windows, HDPE door/latch

Galley Stove/heater (price determined by type/make)

6 gal hot water tank

Anchor lift Windlass SS 1000 watt

Refrigerator 12V DC (price determined by type/make)

Enclosed head with shower (requires cabin arrangement)

Navigation electronics (price determined by type/make)

Highest grade polyurethane exterior paint, sides, deck, cabin

Slip resistant rear deck surface

Please call us for prices

Disclaimer Notice: All information hereon is believed to be Correct, however we reserve the right to change items at any time. Please contact us for information or available options.

Power-Propulsion

(1) Honda BFP60 Power Thrust Outboard Motor with PGM-FI

Honda single-lever side mount shift/throttle control, key-switch

Honda analog gauges, RPM, voltage, trim, and fuel

Manual hydraulic motor steering system

(2) 30 gallon baffled aluminum fuel tanks (1) port and (1) starboard

Manual fuel selector switch and fuel/water filter

Interior

Anchor chain/rope locker with deck pipe

Cuddy, 6’-4” V-berth with cushions, storage below, light

Sides/w nylon hull liner over 1/8” acrylic or poly side panels

Cabin ceiling 1/8” acrylic or poly, 1.5” insulation, (8) switched lights

Dinette/settee/double berth 6’-4”, (2) flip back bench seats, cushions

(1) Berth 6’-4” (under dinette/berth) or use space below for stowage

Standard features

Hull

.19 5068 grade aluminum sides, hull, and deck plate

.19 5068 grade aluminum lateral and long framing

.16 5052 cabin sides and top

.50 aluminum keel, aluminum bow stem with bow eye

Aluminum 1/2 pipe welded rub rail, at gunwale and mid-sides

Bow railing 1.25” dia. heavy duty SS

Anchor Bow roller assembly, welded aluminum

Rear railing 1.25” OD dia. and welded aluminum/coaming

Deck fills, color coded, fiberglass/nylon, fuel, water, waste

(9) 7” aluminum cleats for lines/fenders (4 each side)

Navigation lighting, USCG approved

Slip resistant deck walking areas

Low profile 21” x 21” cuddy escape hatch

Self bailing rear deck

(2) Deck poly compartments for gear storage with hatches

(3) Deck poly storage/fish compartment with hatch

(1) Deck poly storage/fender compartment with hatch

(1) Deck compartment for portable generator with hatch

Windows-Diamond Sea Glaze, anodized alum. (2) slides/screens

(2) Cuddy port windows 10” round rubber sealed

Deck fasteners all SS through bolted

Rear Cabin canvas drop curtain, vinyl windows with roll-up door

Single trumpet horn

Windshield wipers w/pantographic arms, (2) electric (1) manual

Marine head/holding tank 9.5 gal. pressure flush, door, privacy top

Galley counter with SS sink, cold water system w/demand pump

Floor/counter/helm structure - HD marine plywd w/ laminate face

Table top, counter top, HD Poly

Fully adjustable Helm seat with arm rests

Helm wheel 16” SS with stand-up space in front, 4” compass

(2) 16 gallon poly water tanks located center of cabin with valves

(3) water tight compartments (below floor) each with bilge pump

Electrical

Main Battery select control switch

(2) Batteries (1) marine group 27 start, (1) marine group 27 house

12 V DC, 50 Amp main circuit breaker

Main panel 6 gang breakers plus various switched circuits

Sub panel, 4 gang fuses for high amp power accessories

Miscellaneous Standard Equipment

Load-Rite Elite Series dual axel Aluminum bunk trailer 8,000 lb

Hybrid Boat Company LLC, c/o 23506 Bulson Rd, Mount Vernon, WA 98274 Ph 425-508-7406

HybridBoatCompany.com NorthWesternerBoats.com

Registration Number DVH 0480 4-4-2011